Product Description
Application
AJ-2008B haemodialysis machine is applicable for chronic renal failure and other blood purification treatment. This device should be used in medical units. This device is specially designed, produced and sold for renal failure patients to receive haemodialysis, which is not allowed to be used for other purposes.
Introduction
Size & Weight Size: 380mm× 400mm× 1380mm (L*W*H)
Area: 500*520 mm
Weight: 88KG
Power Supply AC220V, 50Hz / 60Hz, 10A
Input power: 1500W
Back-up battery: 30 minutes (optional)
Water input pressure: 0.15 MPa ~ 0.6 MPa, 21.75 P. S. I. ~ 87 P. S. I.
Water input temperature: 10 ~ 30celsius degree
Working environment: Temperature 10 ~ 30celsius degree at relative humidity of no more than 70%.
Dialysate
Dialysate temperature: Preset range 34.0 ~ 39.0celsius degree
Dialysate flux: 300~800 ml/min
Dialysate concentration: 12.1 mS/cm ~ 16.0 mS/cm, ± 0.1 mS/cm
Dialysate mixing ratio: Can set variety ratio.
UF rate Flow range: 0 ml/h ~ 4000 ml/h
Resolution ratio: 1ml
Precision: ± 30 ml/h
Extracorporeal Part
Venous pressure: -180 mmHg ~ +600 mmHg, ± 10 mmHg
Arterial pressure: -380 mmHg ~ +400 mmHg, ± 10 mmHg
TMP pressure: -180 mmHg ~ +600 mmHg, ± 20 mmHg
Blood pump flow range: 20 ml/min ~ 400 ml/min(diameter: 6 mm)
Spare pump flow range: 30 ml/min ~ 600 ml/min(diameter: 8 mm)
Resolution ratio: 1 ml
Precision: Error range ± 10ml or 10% of reading
Heparin Pump
Syringe size: 20, 30, 50 ml
Flow range: 0 ml/h ~ 10 ml/h
Resolution ratio: 0.1ml
Precision: ± 5%
Sanitize
1. Hot decalcification:
Time: About 20 minutes
Temperature: 30~60celsius degree, 500ml/min.
2. Chemical disinfection:
Time: About 45 minutes
Temperature: 30~40celsius degree, 500ml/min.
3. Heat disinfection:
Time: About 60 minutes
Temperature: >85celsius degree, 300ml/min.
Storage Environment Storage temperature should be between 5 ~ 40celsius degree, at relative humidity of no more than 80%.
Monitoring System
Dialysate temperature: Preset range 34.0 ~ 39.0celsius degree, ± 0.5celsius degree
Blood leak detection: Photochromic
Alarm when erythrocyte specific volume is 0.32± 0.02 or blood leak volume is equal or more than 1ml per liter of dialysate
Bubble detection: Ultrasonic
Alarm when a single air bubble volume is more than 200µ L at 200ml/min blood flow
Conductivity: Acoustic-optic, ± 0.5%
Audited Supplier 
){kind=link}