630mA 50kw High Frequency X Ray Machine Aj-Hx630 with Bucky Stand

• Customization: Available
• Certification: CE
• Use: X-ray Machine
• Model NO.: AJ-HX630
• Transport Package: 1PC/CTN
• Specification: ISO, CE
• Trademark: Anjue
• Origin: China
• Production Capacity: 50, 000 PCS/Year

Product Description

630mA 50kW High Frequency X Ray Machine AJ-HX630 with Bucky Stand



Techinical Parameters
 

Model	AJ-HX630
Power	50kW
Power supply	50HZ,60HZ, wire diameter >4mm^2, internal resistance<0.5Ω; 20/32/50kW(220V /380V available),65kW(only 380V).
mA	10-630 mA
KV	40-150kV  stepping by 1kV
Exposure time	0.003~6.3s(34 steps)adjustment:Increased /reduced by 1mS each time
Focus size	Default 0.6*0.6mm/1.2*1.2mm dual focus, different brands of tubes optional
Anode rotating speed/Anode heat capacity	8400prm/1300kHU
Generator frequency	30kHZ/400kHZ(optional)
Radiography table(W*L cm)	73*200cm, Move freely, the wheels with brake.

    

Gravity angle indicator plate·Flexible and precise   Hidden counterweight brake handle·Easy lift


Installation Instructions

1. X-ray room: 20m² room is recommended.  

2. Lead glass size recommended: 40*60cm or 60*80 cm
3. X-ray protection preparation: use barium sulfate powder or lead sheet for the wall of the room, and lead sheet for the ceiling;
4. A fan must be installed on the top to facilitate the discharge of ionized air
5. All surfaces of the x-ray room that people can reach need to be covered with lead sheet or barium sulfate powder. If it is the first floor, the ground does not need to be covered; if it is the top floor and will not polluted the environment, lead protection is not required.