| A |
A/C-Heater System |
|
| 1 |
Vehicle-mounted original air conditioner in driver's cab |
1 |
| 2 |
Vehicle-mounted original air conditioner in Patient's compartment |
1 |
| 3 |
Heater mounted in Patient's compartment |
1 |
| B |
Power Supply and Lighting System |
|
| 1 |
1000W Sine wave inverter |
1 |
| 2 |
100AH backup battery |
1 |
| 3 |
15m mobile cables |
1 |
| 4 |
IP6 waterproof power outlet on the left side of bodywork |
1 |
| 5 |
12V socket mounted in patient's compartment, easy to be operated by doctors |
1 |
| 6 |
220V AC socket mounted in patient's compartment, easy to be operated by doctors |
4 |
| 7 |
12V Ultraviolet radiation disinfector light |
1 |
| 8 |
Courtesy lamp at the back door(Rear shot lamp, can be used when the stretcher up to the vehicle at night time) |
1 |
| 9 |
LED illumination light mounted at the top of Patient's compartment, can be adjusted the brightness of the patient's compartment according to the patient's condition. |
6 |
| 10 |
Night atmosphere lights on both sides of the top of the patient's compartment |
1 |
| 11 |
220V AC power socket in driver's compartment Multi-functional control panel |
1 |
| 12 |
The multifunctional control panel adopts integrated control, and the modified circuit system is equipped with integrated control main box |
1 |
| C |
Emergency alarm system |
|
| 1 |
Long Blue flashing alarm LED lamp bar installed on the special platform of vehicle outside roof |
1 |
| 2 |
The special platform for alarm lights is embedded with 2 LED blue flash lights and 1 white light |
|
| 3 |
Beeper with 100W speaker can adjust the volume. working current ≤10A, output resistance ≤8Ω.working environment -40°--+50° |
1 |
| 4 |
Install alarm and alarm light control button in driver cab |
1 |
| 5 |
Blue flashing light at the left and right side of the vehicle |
4 |
| 6 |
White illumination light at the left and right side of the vehicle |
4 |
| 7 |
Blue flashing light on rear door |
2 |
| D |
Patient's compartment |
|
| 1 |
Mold design thermal blister material (ABS) interior roof in Patient's compartment |
1 |
| 2 |
The side wall of patient's compartment of vehicle is decorated with Mold design thermal blister material (ABS) |
1 |
| 3 |
Middle door with white polymer environmentally friendly flame retardant material interior decoration |
1 |
| 4 |
Rear door with full white interior |
1 |
| 5 |
Patient's compartment floor with imported medical LG acid, alkali, fire, anti-skid, anti-static blue or red floor leather |
1 |
| 6 |
The floor of the medical cabin is sealed around the design to prevent the accumulation of dust and can be washed directly with water |
1 |
| 7 |
Partition wall with Mold design thermal blister material (ABS) between driver's cab and Patient's compartment, a tempered glass window in wall to make observation (push-pull window) |
1 |
| 8 |
The front and rear intercom system installed on the partition wall of patient compartment |
1 |
| 9 |
Ventilation fan mounted in the interior roof of Patient's compartment. Ensure the patient's cab indoor and outdoor air exchange. |
1 |
| 10 |
A folding doctor seat covered with blue leather, mounted to floor near to compartment wall |
1 |
| 11 |
medicine storage cabinet in left front side of Patient's compartment |
1 |
| 12 |
Oxygen cylinder fixing cabinet is installed at the left wheel hub of the patient's compartment |
1 |
| 13 |
Medical instrument cabinet with blister material (ABS) in front of oxygen cabinet on the left side of Patient's compartment |
1 |
| 14 |
Blue upturn storage wall cabinet is installed on the upper left side of the Patient's compartment |
1 |
| 15 |
Storage wall cabinet is installed on the upper right side of the Patient's compartment |
1 |
| 16 |
In front of the left medical instrument cabinet, install the longitudinal oxygen supply equipment belt. In the equipment belt, install 2 sets of German oxygen terminal interfaces and power sockets |
1 |
| 17 |
Oxygen bottle (10L) ,mounted in left side of vehicle, Oxygen flow meter and pressure controller, the arrangement of oxygen pipeline is reasonable, and the control device is convenient for medical personnel to operate and monitor. |
2 |
| 18 |
Special oxygen suction (humidification) device |
2 |
| 19 |
Forward single seat with three-point safety belt mounted on the right side of the Patient's compartment. The cushion and backrest surface are covered with leather |
1 |
| 20 |
A molded two-persons seat with backrest and three-point safety belt installed on the right side of the Patient's compartment |
1 |
| 21 |
Antibacterial safety handrails are installed on the rear side of the two-persons seat |
1 |
| 22 |
Sliding infusion bottle holder at the top of the medical cabin is reliable, easy to operate, reliable and clamped, and the bottle will not shake while driving. |
1 |
| 23 |
Anti-bacterial safety handrails are installed on the top of patient's compartment |
1 |
| 24 |
Auto-loading stretcher mounted in patient's compartment |
1 |
| 25 |
Stretcher loading guide board |
|
| 26 |
Stretcher bottom stainless steel plate |
1 |
| 27 |
Scoop stretcher installed on the rear door |
1 |
| 28 |
Equipment and instrument fixing table with Instrument fixing belt |
2 |
| 29 |
Stainless steel dirt bucket |
1 |
| 30 |
Rear bumper guard |
1 |
| 31 |
Anti-collision headrest on middle door and rear door of in medical cabin |
1 |
| 32 |
Fire extinguisher, can be removed from the holder easily. |
1 |
| 33 |
Black glass-film on the left side of Patient's compartment, and 2/3 frosted film on the right side |
1 |
| 34 |
Customize the red / blue reflective belt of the body waist according to the needs of the customer, in accordance with the national regulations. |
1 |
Audited Supplier 
){kind=link}